Vacuum Dehydration System
Why Need of a Vacuum Dehydration Unit
The moisture from atmosphere tends to enter the hydraulic / lubricating oil reservoirs through filler breather, cylinder seals, gaps in fittings and valves etc accelerates the process of oxidation resulting in sludge and varnish formation. This forms a greasy mass and clogs the openings in valves specially proportional and servo valves making its operation sluggish.
Why Need Microcare Vacuum Dehydration Unit.
Microcare Dehydration Machine is Used for removal of Moisture and entrapped gasses and air from Hydraulic Oil,Turbine Oil or Fire Retardant fluid used for Lubrication to control the Entire system.Vacuum Dehydration Unit (VDU) Prohibits the Generation of Sludge and sticky matter in hydrocarbon fluids thereby eliminating the risk of the machine’s Breakdown and increased life of Turbine Oil or Hydraulic Oil. 
The Fully Automatic Vacuum Dehydration System injects gently heated oil into a vacuum chamber thus extracting dissolved moisture air and gases from oil at 45 to 55 degree centigrate.Microcare Vacuum Dehydration Unit incorporates double/single stage oil filled electrically operated vacuum pump.
To remove Solid Particles with entrapped Gases & Air you need Vacuum Dehydration and Purification system.
Typical Applications For VDPOS
Our vacuum Dehydration Oil purification Systems (VDOPS) are recommended for use on the following application.
- Turbine Lube oils
- Paper Machine Lube Oils
- Gearbox Oil (ISO 150 to ISO 680)
- Transformer Oils (Mineral Based)
- Silicon Oils
- Refrigerant Oil
- Compressor Oils
- EHC Fluids (Fyrquel)
- PAO Fluids
MICROCARE - VACCUM DEHYDRATION UNIT (VDU)
DATA SHEET OF DIFFERENT MODELS
Sr | Particulars | MICROCARE | MICROCARE | MICROCARE |
01 | Model | MDH 50 | MDH 70 | MDH 100 |
02 | Discharge Pump | 10-20 LPM | 20 to 40 LPM | 40-100 LPM |
Motor HP | 0.5 HP 415 V | 1 HP 415 V | 1 – 2 HP 415 V | |
03 | Vacuum Pump | 100 LPM | 200 LPM | 400/500 LPM |
Motor HP | 0.5 HP 415 V | 0.5 HP 415 V | 0.75 HP 415 V | |
04 | Suction Pump | Not Applicable | 20-40 LPM | 40-100 LPM |
05 | Heater capacity | 3 Kw | 6 Kw | 6 Kw |
06. | Dispension Media in Vacuum Chamber | Baffle Plates | Baffle Plates | Random Packing Media |
07 | Cooling Unit | Water cooled Chiller | Water cooled Chiller | Water cooled Chiller |
08 | Instrumentation | NA | Pressure Transducer for Vacuum | Pressure Tranducer for Vacuum. |
Temprature controller and indication provided | Temprature controller and indication provided | Temprature controller and indication provided | ||
Oil Level sensor in Vacuum Chamber | Oil Level sensor in Vacuum Chamber | Oil Level sensor in Vacuum Chamber | ||
09 | Water Drain | Manual discharge. Optional for Auto. | Manual discharge. Optional for Auto. | Manual discharge. Optional for Auto. |
10 | Overall Dimensions | L 900 x W – 900, H – 1550 | L – 1050 x W – 850 x H – 1620 mm | L – 1200 x W – 900 x H – 1700 mm |
11 | Weight | Approx 250 Kg. | Approx 350 Kg. | Approx 450 Kg. |